Search▼ Menu▼
Home

AUTOMATIC Garage Door Services


Sectional Garage Door Parts

Roll Up Replacement Parts

1-661-942-4029





View larger picture

Sectional Garage Door 2 inch Black Nylon Roller.

Rating 35lbs per roller @ 10,000 8' door cycles.

Four Inch long stem - 7/16" thick.

Our Price: $ 5.95

Quantity:   




View larger picture

Sectional Garage Door 2" Steel 10 Ball Roller.

Rating 75lbs per roller @ 15,000 12' door cycles.

Four Inch long stem - 7/16" thick.

Our Price: $ 7.95

Quantity:   




View larger picture

Sectional Garage Door 2" 10 Ball White Nylon Roller.

Rating 75lbs per roller @ 15,000 12' door cycles.

Four Inch long stem - 7/16" thick.

Our Price: $ 7.95

Quantity:   




View larger picture

Sectional Garage Door Number One Hinge.

14 Gauge Steel.

Replacement for center and intermediate Number One Hinges on Residential Sectional garage doors..

There should be a number 1 stamped on the hinge.

Our Price: $ 9.95

Quantity:   




View larger picture

Sectional Garage Door Number Two Hinge.

14 Gauge Steel.

Replacement for Number Two Hinge(s) that are located on the outside edges of Residential Sectional garage doors.

There should be a number 2 stamped on the hinge.

Our Price: $ 10.95

Quantity:   




View larger picture

Sectional Garage Door Number Three Hinge.

14 Gauge Steel.

Replacement for Number Three Hinge(s) that are located on the outside edges of Residential Sectional garage doors.

There should be a number 3 stamped on the hinge.

Our Price: $ 11.95

Quantity:   




View larger picture

Sectional Garage Door Number Four Hinge.

14 Gauge Steel.

Replacement for Number Four Hinge(s) that are located on the outside edges of Residential Sectional garage doors.

There should be a number 4 stamped on the hinge.

Our Price: $ 12.95

Quantity:   




View larger picture

Sectional Garage Door Adjustable Top Fixtures.

14 Gauge Steel.

Replacement for most Top Fixtures that are located on the top outside edges of Residential Sectional garage doors.

Sold as a pair.

Our Price: $ 29.95

Quantity:   




View larger picture

Sectional Garage Door Low Headroom Top Fixture.

12 Gauge Steel.

Replacement for most Top Fixtures that are located on the top outside edges of Residential Sectional garage doors.

For Low Headroom Sectional garage doors only.

Sold as a pair.

Our Price: $ 29.95

Quantity:   




View larger picture

Sectional Garage Door Bottom Brackets.

13 Gauge Steel.

Milford Pin.

5-11/16" high x 2-11/16" wide.

1-1/4" Side Flange.

Replacement Bottom Brackets for most Residential Sectional garage doors .

Sold as a pair.

Our Price: $ 29.95

Quantity:   




View larger picture

Sectional Garage Door Low Headroom Bottom Brackets.

11 Gauge Steel.

6-1/2" high x 3-1/4" wide.

Drilled Pin.

Replacement Low Headroom Bottom Brackets for most Residential Sectional garage doors.

For Low Headroom Sectional garage doors only.

Sold as a pair.

Our Price: $ 35.95

Quantity:   




View larger picture

Sectional Garage Door Operator Reinforcing Bracket.

Can be used with wood, aluminum or steel sectional garage doors.

Adds strength to the top panel where your Garage Door Opener arm connects.

Fits 21" Sectional garage door panels.

Heavy gauge steel.

Comes in white powercoat or metalic steel.

Our Price: $ 32.95

Quantity:   




View larger picture

Sectional Garage Door Quick Closing Brackets.

Can be used with wood, aluminum or steel sectional garage doors.

Gives your Sectional garage door about two more inches of headroom clearance.

Allows more room for Automatic Garage Door Openers where otherwise not possible.

Will require a total of two roller for each bracket.

Sold as a pair.

Our Price: $ 49.95

Quantity:   




View larger picture

Sectional Garage Door Standard Lift Drums ( 7 feet ).

For use with residential sectional garage doors up to 7 feet.

One Inch Bore.

Rating 265lbs.

Normally used for lighter weight steel Sectional garage doors.

Sold as a pair.

Our Price: $ 29.95

Quantity:   




View larger picture

Sectional Garage Door Heavy Standard Lift Drum ( 8 feet ).

For use with residential sectional garage doors up to 8 feet.

One Inch Bore.

Rating 375lbs.

Normally used for heavier weight wood or insulated steel Sectional garage doors.

Sold as a pair.

Our Price: $ 32.95

Quantity:   




View larger picture

Sectional Garage Door Three Inch Sheave Pulley.

For use with residential sectional garage doors.

Maximum Cable size 3/16".

Normally used as an Idler for Low Headroom Sectional garage doors.

Sold individually.

Our Price: $ 8.95

Quantity:   




View larger picture

Sectional Garage Door Four Inch Sheave Pulley.

For use with residential sectional garage doors.

Maximum Cable size 3/16".

Normally used as an Idler for Low Headroom Sectional garage doors.

Sold individually.

Our Price: $ 9.95

Quantity:   




View larger picture

Sectional Garage Door Torsion Cable ( 7 Feet ).

For use with residential sectional garage doors up to 7 feet.

Cable thickness 1/8".

Sold as a pair.

Our Price: $ 25.95

Quantity:   




View larger picture

Sectional Garage Door Torsion Cable ( 8 Feet ).

For use with residential sectional garage doors up to 8 feet.

Cable thickness 1/8".

Sold as a pair.

Our Price: $ 27.95

Quantity:   




View larger picture

Sectional Garage Door Inside Slide Lock.

For sectional garage doors with 2" tracks.

Locks from the inside.

Our Price: $ 12.95

Quantity:   




View larger picture

Sectional Garage Door T-handle Lock Kit.

For Sectional garage doors without a Garage Door Opener.

Complete Kit.

Locks from the outside.

Our Price: $ 62.95

Quantity:   




View larger picture

Sectional Garage Door End Bearing Plates.

For use with residential Sectional garage doors.

Due to availablity and differences in manufacturing...The Actual End Bearing Plates may be different than whats provided in this picture.

Shipped with left and right End Bearing Plates.

Our Price: $ 19.95

Quantity:   




View larger picture

Sectional Garage Door Center Bearing Plate.

For use with residential Sectional garage doors.

Adjustable.

Our Price: $ 14.95

Quantity:   




View larger picture

Sectional Garage Door Two Inch Center Bearing.

For use with residential Sectional garage doors.

Two Inch outer diameter.

One Inch bore.

Case hardend chromate finish and greased packed.

Great upgrade from Nylon Bearings.

Our Price: $ 9.95

Quantity:   




View larger picture

Sectional Garage Door Torsion Spring ( LW .207 x 1 3/4" ID ).

Left Wound .207 wire size X 1 3/4 inch inner diameter.

Sold in 1/2 inch increments ranging from 22 to 36 inches in active length.

High quality oil tempered wire.

Black Coating for a clean durable finish...Enhanced corrosion resistance.

Printed wire diameter and length identification.

Exclusive pre-printed winding line.

Includes both Stationary Cone and Winding Cone.

Wire size is determined by thousandths of an inch and can be measured with a micrometer or vernier caliper.

We recommend having these Torsion Springs professional installed with the proper tools, experience and knowledge! Replacing Torsion Springs is very dangerous! These Torsion Springs are loaded with alot of tension, pressure and force!

Placing an order for these Torsion Springs relieves Garagedooropeners.us and Vendors of ALL liability or responsibility for properly damage, injury or death that may occur! Regardless of who or what places an order!

SHIPPED UPS GROUND ONLY...ALL TORSION SPRING SALES ARE FINAL!

Sorry...If these Terms are to harsh...Please do not place an order!

Our Price : $ 39.95

Select Your Torsion Springs:

Quantity:   




View larger picture

Sectional Garage Door Torsion Spring ( RW .207 x 1 3/4" ID ).

Right Wound .207 wire size X 1 3/4 inch inner diameter.

Sold in 1/2 inch increments ranging from 22 to 36 inches in active length.

High quality oil tempered wire.

Black Coating for a clean durable finish...Enhanced corrosion resistance.

Printed wire diameter and length identification.

Exclusive pre-printed winding line.

Includes both Stationary Cone and Winding Cone.

Wire size is determined by thousandths of an inch and can be measured with a micrometer or vernier caliper.

We recommend having these Torsion Springs professional installed with the proper tools, experience and knowledge! Replacing Torsion Springs is very dangerous! These Torsion Springs are loaded with alot of tension, pressure and force!

Placing an order for these Torsion Springs relieves Garagedooropeners.us and Vendors of ALL liability or responsibility for properly damage, injury or death that may occur! Regardless of who or what places an order!

SHIPPED UPS GROUND ONLY...ALL TORSION SPRING SALES ARE FINAL!

Sorry...If these Terms are to harsh...Please do not place an order!

Our Price : $ 39.95

Select Your Torsion Springs:

Quantity:   




View larger picture

Sectional Garage Door Torsion Spring ( LW .218 x 1 3/4" ID ).

Left Wound .218 wire size X 1 3/4 inch inner diameter.

Sold in 1/2 inch increments ranging from 22 to 36 inches in active length.

High quality oil tempered wire.

Black Coating for a clean durable finish...Enhanced corrosion resistance.

Printed wire diameter and length identification.

Exclusive pre-printed winding line.

Includes both Stationary Cone and Winding Cone.

Wire size is determined by thousandths of an inch and can be measured with a micrometer or vernier caliper.

We recommend having these Torsion Springs professional installed with the proper tools, experience and knowledge! Replacing Torsion Springs is very dangerous! These Torsion Springs are loaded with alot of tension, pressure and force!

Placing an order for these Torsion Springs relieves Garagedooropeners.us and Vendors of ALL liability or responsibility for properly damage, injury or death that may occur! Regardless of who or what places an order!

SHIPPED UPS GROUND ONLY...ALL TORSION SPRING SALES ARE FINAL!

Sorry...If these Terms are to harsh...Please do not place an order!

Our Price : $ 43.95

Select Your Torsion Springs:

Quantity:   




View larger picture

Sectional Garage Door Torsion Spring ( RW .218 x 1 3/4" ID ).

Right Wound .218 wire size X 1 3/4 inch inner diameter.

Sold in 1/2 inch increments ranging from 22 to 36 inches in active length.

High quality oil tempered wire.

Black Coating for a clean durable finish...Enhanced corrosion resistance.

Printed wire diameter and length identification.

Exclusive pre-printed winding line.

Includes both Stationary Cone and Winding Cone.

Wire size is determined by thousandths of an inch and can be measured with a micrometer or vernier caliper.

We recommend having these Torsion Springs professional installed with the proper tools, experience and knowledge! Replacing Torsion Springs is very dangerous! These Torsion Springs are loaded with alot of tension, pressure and force!

Placing an order for these Torsion Springs relieves Garagedooropeners.us and Vendors of ALL liability or responsibility for properly damage, injury or death that may occur! Regardless of who or what places an order!

SHIPPED UPS GROUND ONLY...ALL TORSION SPRING SALES ARE FINAL!

Sorry...If these Terms are to harsh...Please do not place an order!

Our Price : $ 43.95

Select Your Torsion Springs:

Quantity:   




View larger picture

Sectional Garage Door Torsion Spring ( LW .225 x 1 3/4" ID ).

Left Wound .225 wire size X 1 3/4 inch inner diameter.

Sold in 1/2 inch increments ranging from 22 to 36 inches in active length.

High quality oil tempered wire.

Black Coating for a clean durable finish...Enhanced corrosion resistance.

Printed wire diameter and length identification.

Exclusive pre-printed winding line.

Includes both Stationary Cone and Winding Cone.

Wire size is determined by thousandths of an inch and can be measured with a micrometer or vernier caliper.

We recommend having these Torsion Springs professional installed with the proper tools, experience and knowledge! Replacing Torsion Springs is very dangerous! These Torsion Springs are loaded with alot of tension, pressure and force!

Placing an order for these Torsion Springs relieves Garagedooropeners.us and Vendors of ALL liability or responsibility for properly damage, injury or death that may occur! Regardless of who or what places an order!

SHIPPED UPS GROUND ONLY...ALL TORSION SPRING SALES ARE FINAL!

Sorry...If these Terms are to harsh...Please do not place an order!

Our Price : $ 44.95

Select Your Torsion Springs:

Quantity:   




View larger picture

Sectional Garage Door Torsion Spring ( RW .225 x 1 3/4" ID ).

Right Wound .225 wire size X 1 3/4 inch inner diameter.

Sold in 1/2 inch increments ranging from 22 to 36 inches in active length.

High quality oil tempered wire.

Black Coating for a clean durable finish...Enhanced corrosion resistance.

Printed wire diameter and length identification.

Exclusive pre-printed winding line.

Includes both Stationary Cone and Winding Cone.

Wire size is determined by thousandths of an inch and can be measured with a micrometer or vernier caliper.

We recommend having these Torsion Springs professional installed with the proper tools, experience and knowledge! Replacing Torsion Springs is very dangerous! These Torsion Springs are loaded with alot of tension, pressure and force!

Placing an order for these Torsion Springs relieves Garagedooropeners.us and Vendors of ALL liability or responsibility for properly damage, injury or death that may occur! Regardless of who or what places an order!

SHIPPED UPS GROUND ONLY...ALL TORSION SPRING SALES ARE FINAL!

Sorry...If these Terms are to harsh...Please do not place an order!

Our Price : $ 44.95

Select Your Torsion Springs:

Quantity:   




View larger picture

Sectional Garage Door Torsion Spring ( LW .234 x 1 3/4" ID ).

Left Wound .234 wire size X 1 3/4 inch inner diameter.

Sold in 1/2 inch increments ranging from 22 to 36 inches in active length.

High quality oil tempered wire.

Black Coating for a clean durable finish...Enhanced corrosion resistance.

Printed wire diameter and length identification.

Exclusive pre-printed winding line.

Includes both Stationary Cone and Winding Cone.

Wire size is determined by thousandths of an inch and can be measured with a micrometer or vernier caliper.

We recommend having these Torsion Springs professional installed with the proper tools, experience and knowledge! Replacing Torsion Springs is very dangerous! These Torsion Springs are loaded with alot of tension, pressure and force!

Placing an order for these Torsion Springs relieves Garagedooropeners.us and Vendors of ALL liability or responsibility for properly damage, injury or death that may occur! Regardless of who or what places an order!

SHIPPED UPS GROUND ONLY...ALL TORSION SPRING SALES ARE FINAL!

Sorry...If these Terms are to harsh...Please do not place an order!

Our Price : $ 46.95

Select Your Torsion Springs:

Quantity:   




View larger picture

Sectional Garage Door Torsion Spring ( RW .234 x 1 3/4" ID ).

Right Wound .234 wire size X 1 3/4 inch inner diameter.

Sold in 1/2 inch increments ranging from 22 to 36 inches in active length.

High quality oil tempered wire.

Black Coating for a clean durable finish...Enhanced corrosion resistance.

Printed wire diameter and length identification.

Exclusive pre-printed winding line.

Includes both Stationary Cone and Winding Cone.

Wire size is determined by thousandths of an inch and can be measured with a micrometer or vernier caliper.

We recommend having these Torsion Springs professional installed with the proper tools, experience and knowledge! Replacing Torsion Springs is very dangerous! These Torsion Springs are loaded with alot of tension, pressure and force!

Placing an order for these Torsion Springs relieves Garagedooropeners.us and Vendors of ALL liability or responsibility for properly damage, injury or death that may occur! Regardless of who or what places an order!

SHIPPED UPS GROUND ONLY...ALL TORSION SPRING SALES ARE FINAL!

Sorry...If these Terms are to harsh...Please do not place an order!

Our Price : $ 46.95

Select Your Torsion Springs:

Quantity:   




View larger picture

Sectional Garage Door Torsion Spring ( LW .243 x 1 3/4" ID ).

Left Wound .243 wire size X 1 3/4 inch inner diameter.

Sold in 1/2 inch increments ranging from 22 to 36 inches in active length.

High quality oil tempered wire.

Black Coating for a clean durable finish...Enhanced corrosion resistance.

Printed wire diameter and length identification.

Exclusive pre-printed winding line.

Includes both Stationary Cone and Winding Cone.

Wire size is determined by thousandths of an inch and can be measured with a micrometer or vernier caliper.

We recommend having these Torsion Springs professional installed with the proper tools, experience and knowledge! Replacing Torsion Springs is very dangerous! These Torsion Springs are loaded with alot of tension, pressure and force!

Placing an order for these Torsion Springs relieves Garagedooropeners.us and Vendors of ALL liability or responsibility for properly damage, injury or death that may occur! Regardless of who or what places an order!

SHIPPED UPS GROUND ONLY...ALL TORSION SPRING SALES ARE FINAL!

Sorry...If these Terms are to harsh...Please do not place an order!

Our Price : $ 49.95

Select Your Torsion Springs:

Quantity:   




View larger picture

Sectional Garage Door Torsion Spring ( RW .243 x 1 3/4" ID ).

Right Wound .243 wire size X 1 3/4 inch inner diameter.

Sold in 1/2 inch increments ranging from 22 to 36 inches in active length.

High quality oil tempered wire.

Black Coating for a clean durable finish...Enhanced corrosion resistance.

Printed wire diameter and length identification.

Exclusive pre-printed winding line.

Includes both Stationary Cone and Winding Cone.

Wire size is determined by thousandths of an inch and can be measured with a micrometer or vernier caliper.

We recommend having these Torsion Springs professional installed with the proper tools, experience and knowledge! Replacing Torsion Springs is very dangerous! These Torsion Springs are loaded with alot of tension, pressure and force!

Placing an order for these Torsion Springs relieves Garagedooropeners.us and Vendors of ALL liability or responsibility for properly damage, injury or death that may occur! Regardless of who or what places an order!

SHIPPED UPS GROUND ONLY...ALL TORSION SPRING SALES ARE FINAL!

Sorry...If these Terms are to harsh...Please do not place an order!

Our Price : $ 49.95

Select Your Torsion Springs:

Quantity:   




View larger picture

Sectional Garage Door Torsion Spring ( LW .250 x 1 3/4" ID ).

Left Wound .250 wire size X 1 3/4 inch inner diameter.

Sold in 1/2 inch increments ranging from 22 to 36 inches in active length.

High quality oil tempered wire.

Black Coating for a clean durable finish...Enhanced corrosion resistance.

Printed wire diameter and length identification.

Exclusive pre-printed winding line.

Includes both Stationary Cone and Winding Cone.

Wire size is determined by thousandths of an inch and can be measured with a micrometer or vernier caliper.

We recommend having these Torsion Springs professional installed with the proper tools, experience and knowledge! Replacing Torsion Springs is very dangerous! These Torsion Springs are loaded with alot of tension, pressure and force!

Placing an order for these Torsion Springs relieves Garagedooropeners.us and Vendors of ALL liability or responsibility for properly damage, injury or death that may occur! Regardless of who or what places an order!

SHIPPED UPS GROUND ONLY...ALL TORSION SPRING SALES ARE FINAL!

Sorry...If these Terms are to harsh...Please do not place an order!

Our Price : $ 53.95

Select Your Torsion Springs:

Quantity:   




View larger picture

Sectional Garage Door Torsion Spring ( RW .250 x 1 3/4" ID ).

Right Wound .250 wire size X 1 3/4 inch inner diameter.

Sold in 1/2 inch increments ranging from 22 to 36 inches in active length.

High quality oil tempered wire.

Black Coating for a clean durable finish...Enhanced corrosion resistance.

Printed wire diameter and length identification.

Exclusive pre-printed winding line.

Includes both Stationary Cone and Winding Cone.

Wire size is determined by thousandths of an inch and can be measured with a micrometer or vernier caliper.

We recommend having these Torsion Springs professional installed with the proper tools, experience and knowledge! Replacing Torsion Springs is very dangerous! These Torsion Springs are loaded with alot of tension, pressure and force!

Placing an order for these Torsion Springs relieves Garagedooropeners.us and Vendors of ALL liability or responsibility for properly damage, injury or death that may occur! Regardless of who or what places an order!

SHIPPED UPS GROUND ONLY...ALL TORSION SPRING SALES ARE FINAL!

Sorry...If these Terms are to harsh...Please do not place an order!

Our Price : $ 53.95

Select Your Torsion Springs:

Quantity:   




View larger picture

Sectional Garage Door Torsion Spring ( LW .262 x 1 3/4" ID ).

Left Wound .262 wire size X 1 3/4 inch inner diameter.

Sold in 1/2 inch increments ranging from 22 to 36 inches in active length.

High quality oil tempered wire.

Black Coating for a clean durable finish...Enhanced corrosion resistance.

Printed wire diameter and length identification.

Exclusive pre-printed winding line.

Includes both Stationary Cone and Winding Cone.

Wire size is determined by thousandths of an inch and can be measured with a micrometer or vernier caliper.

We recommend having these Torsion Springs professional installed with the proper tools, experience and knowledge! Replacing Torsion Springs is very dangerous! These Torsion Springs are loaded with alot of tension, pressure and force!

Placing an order for these Torsion Springs relieves Garagedooropeners.us and Vendors of ALL liability or responsibility for properly damage, injury or death that may occur! Regardless of who or what places an order!

SHIPPED UPS GROUND ONLY...ALL TORSION SPRING SALES ARE FINAL!

Sorry...If these Terms are to harsh...Please do not place an order!

Our Price : $ 58.95

Select Your Torsion Springs:

Quantity:   




View larger picture

Sectional Garage Door Torsion Spring ( RW .262 x 1 3/4" ID ).

Right Wound .262 wire size X 1 3/4 inch inner diameter.

Sold in 1/2 inch increments ranging from 22 to 36 inches in active length.

High quality oil tempered wire.

Black Coating for a clean durable finish...Enhanced corrosion resistance.

Printed wire diameter and length identification.

Exclusive pre-printed winding line.

Includes both Stationary Cone and Winding Cone.

Wire size is determined by thousandths of an inch and can be measured with a micrometer or vernier caliper.

We recommend having these Torsion Springs professional installed with the proper tools, experience and knowledge! Replacing Torsion Springs is very dangerous! These Torsion Springs are loaded with alot of tension, pressure and force!

Placing an order for these Torsion Springs relieves Garagedooropeners.us and Vendors of ALL liability or responsibility for properly damage, injury or death that may occur! Regardless of who or what places an order!

SHIPPED UPS GROUND ONLY...ALL TORSION SPRING SALES ARE FINAL!

Sorry...If these Terms are to harsh...Please do not place an order!

Our Price : $ 58.95

Select Your Torsion Springs:

Quantity:   




View larger picture

Sectional Garage Door Torsion Spring ( LW .207 x 2" ID ).

Left Wound .207 wire size X 2 inch inner diameter.

Sold in 1/2 inch increments ranging from 22 to 36 inches in active length.

High quality oil tempered wire.

Black Coating for a clean durable finish...Enhanced corrosion resistance.

Printed wire diameter and length identification.

Exclusive pre-printed winding line.

Includes both Stationary Cone and Winding Cone.

Wire size is determined by thousandths of an inch and can be measured with a micrometer or vernier caliper.

We recommend having these Torsion Springs professional installed with the proper tools, experience and knowledge! Replacing Torsion Springs is very dangerous! These Torsion Springs are loaded with alot of tension, pressure and force!

Placing an order for these Torsion Springs relieves Garagedooropeners.us and Vendors of ALL liability or responsibility for properly damage, injury or death that may occur! Regardless of who or what places an order!

SHIPPED UPS GROUND ONLY...ALL TORSION SPRING SALES ARE FINAL!

Sorry...If these Terms are to harsh...Please do not place an order!

Our Price : $ 45.95

Select Your Torsion Springs:

Quantity:   




View larger picture

Sectional Garage Door Torsion Spring ( RW .207 x 2" ID ).

Right Wound .207 wire size X 2 inch inner diameter.

Sold in 1/2 inch increments ranging from 22 to 36 inches in active length.

High quality oil tempered wire.

Black Coating for a clean durable finish...Enhanced corrosion resistance.

Printed wire diameter and length identification.

Exclusive pre-printed winding line.

Includes both Stationary Cone and Winding Cone.

Wire size is determined by thousandths of an inch and can be measured with a micrometer or vernier caliper.

We recommend having these Torsion Springs professional installed with the proper tools, experience and knowledge! Replacing Torsion Springs is very dangerous! These Torsion Springs are loaded with alot of tension, pressure and force!

Placing an order for these Torsion Springs relieves Garagedooropeners.us and Vendors of ALL liability or responsibility for properly damage, injury or death that may occur! Regardless of who or what places an order!

SHIPPED UPS GROUND ONLY...ALL TORSION SPRING SALES ARE FINAL!

Sorry...If these Terms are to harsh...Please do not place an order!

Our Price : $ 45.95

Select Your Torsion Springs:

Quantity:   




View larger picture

Sectional Garage Door Torsion Spring ( LW .218 x 2" ID ).

Left Wound .218 wire size X 2 inch inner diameter.

Sold in 1/2 inch increments ranging from 22 to 36 inches in active length.

High quality oil tempered wire.

Black Coating for a clean durable finish...Enhanced corrosion resistance.

Printed wire diameter and length identification.

Exclusive pre-printed winding line.

Includes both Stationary Cone and Winding Cone.

Wire size is determined by thousandths of an inch and can be measured with a micrometer or vernier caliper.

We recommend having these Torsion Springs professional installed with the proper tools, experience and knowledge! Replacing Torsion Springs is very dangerous! These Torsion Springs are loaded with alot of tension, pressure and force!

Placing an order for these Torsion Springs relieves Garagedooropeners.us and Vendors of ALL liability or responsibility for properly damage, injury or death that may occur! Regardless of who or what places an order!

SHIPPED UPS GROUND ONLY...ALL TORSION SPRING SALES ARE FINAL!

Sorry...If these Terms are to harsh...Please do not place an order!

Our Price : $ 48.95

Select Your Torsion Springs:

Quantity:   




View larger picture

Sectional Garage Door Torsion Spring ( RW .218 x 2" ID ).

Right Wound .218 wire size X 2 inch inner diameter.

Sold in 1/2 inch increments ranging from 22 to 36 inches in active length.

High quality oil tempered wire.

Black Coating for a clean durable finish...Enhanced corrosion resistance.

Printed wire diameter and length identification.

Exclusive pre-printed winding line.

Includes both Stationary Cone and Winding Cone.

Wire size is determined by thousandths of an inch and can be measured with a micrometer or vernier caliper.

We recommend having these Torsion Springs professional installed with the proper tools, experience and knowledge! Replacing Torsion Springs is very dangerous! These Torsion Springs are loaded with alot of tension, pressure and force!

Placing an order for these Torsion Springs relieves Garagedooropeners.us and Vendors of ALL liability or responsibility for properly damage, injury or death that may occur! Regardless of who or what places an order!

SHIPPED UPS GROUND ONLY...ALL TORSION SPRING SALES ARE FINAL!

Sorry...If these Terms are to harsh...Please do not place an order!

Our Price : $ 48.95

Select Your Torsion Springs:

Quantity:   




View larger picture

Sectional Garage Door Torsion Spring ( LW .225 x 2" ID ).

Left Wound .225 wire size X 2 inch inner diameter.

Sold in 1/2 inch increments ranging from 22 to 36 inches in active length.

High quality oil tempered wire.

Black Coating for a clean durable finish...Enhanced corrosion resistance.

Printed wire diameter and length identification.

Exclusive pre-printed winding line.

Includes both Stationary Cone and Winding Cone.

Wire size is determined by thousandths of an inch and can be measured with a micrometer or vernier caliper.

We recommend having these Torsion Springs professional installed with the proper tools, experience and knowledge! Replacing Torsion Springs is very dangerous! These Torsion Springs are loaded with alot of tension, pressure and force!

Placing an order for these Torsion Springs relieves Garagedooropeners.us and Vendors of ALL liability or responsibility for properly damage, injury or death that may occur! Regardless of who or what places an order!

SHIPPED UPS GROUND ONLY...ALL TORSION SPRING SALES ARE FINAL!

Sorry...If these Terms are to harsh...Please do not place an order!

Our Price : $ 51.95

Select Your Torsion Springs:

Quantity:   




View larger picture

Sectional Garage Door Torsion Spring ( RW .225 x 2" ID ).

Right Wound .225 wire size X 2 inch inner diameter.

Sold in 1/2 inch increments ranging from 22 to 36 inches in active length.

High quality oil tempered wire.

Black Coating for a clean durable finish...Enhanced corrosion resistance.

Printed wire diameter and length identification.

Exclusive pre-printed winding line.

Includes both Stationary Cone and Winding Cone.

Wire size is determined by thousandths of an inch and can be measured with a micrometer or vernier caliper.

We recommend having these Torsion Springs professional installed with the proper tools, experience and knowledge! Replacing Torsion Springs is very dangerous! These Torsion Springs are loaded with alot of tension, pressure and force!

Placing an order for these Torsion Springs relieves Garagedooropeners.us and Vendors of ALL liability or responsibility for properly damage, injury or death that may occur! Regardless of who or what places an order!

SHIPPED UPS GROUND ONLY...ALL TORSION SPRING SALES ARE FINAL!

Sorry...If these Terms are to harsh...Please do not place an order!

Our Price : $ 51.95

Select Your Torsion Springs:

Quantity:   




View larger picture

Sectional Garage Door Torsion Spring ( LW .234 x 2" ID ).

Left Wound .234 wire size X 2 inch inner diameter.

Sold in 1/2 inch increments ranging from 22 to 36 inches in active length.

High quality oil tempered wire.

Black Coating for a clean durable finish...Enhanced corrosion resistance.

Printed wire diameter and length identification.

Exclusive pre-printed winding line.

Includes both Stationary Cone and Winding Cone.

Wire size is determined by thousandths of an inch and can be measured with a micrometer or vernier caliper.

We recommend having these Torsion Springs professional installed with the proper tools, experience and knowledge! Replacing Torsion Springs is very dangerous! These Torsion Springs are loaded with alot of tension, pressure and force!

Placing an order for these Torsion Springs relieves Garagedooropeners.us and Vendors of ALL liability or responsibility for properly damage, injury or death that may occur! Regardless of who or what places an order!

SHIPPED UPS GROUND ONLY...ALL TORSION SPRING SALES ARE FINAL!

Sorry...If these Terms are to harsh...Please do not place an order!

Our Price : $ 54.95

Select Your Torsion Springs:

Quantity:   




View larger picture

Sectional Garage Door Torsion Spring ( RW .234 x 2" ID ).

Right Wound .234 wire size X 2 inch inner diameter.

Sold in 1/2 inch increments ranging from 22 to 36 inches in active length.

High quality oil tempered wire.

Black Coating for a clean durable finish...Enhanced corrosion resistance.

Printed wire diameter and length identification.

Exclusive pre-printed winding line.

Includes both Stationary Cone and Winding Cone.

Wire size is determined by thousandths of an inch and can be measured with a micrometer or vernier caliper.

We recommend having these Torsion Springs professional installed with the proper tools, experience and knowledge! Replacing Torsion Springs is very dangerous! These Torsion Springs are loaded with alot of tension, pressure and force!

Placing an order for these Torsion Springs relieves Garagedooropeners.us and Vendors of ALL liability or responsibility for properly damage, injury or death that may occur! Regardless of who or what places an order!

SHIPPED UPS GROUND ONLY...ALL TORSION SPRING SALES ARE FINAL!

Sorry...If these Terms are to harsh...Please do not place an order!

Our Price : $ 54.95

Select Your Torsion Springs:

Quantity:   




View larger picture

Sectional Garage Door Torsion Spring ( LW .243 x 2" ID ).

Left Wound .243 wire size X 2 inch inner diameter.

Sold in 1/2 inch increments ranging from 22 to 36 inches in active length.

High quality oil tempered wire.

Black Coating for a clean durable finish...Enhanced corrosion resistance.

Printed wire diameter and length identification.

Exclusive pre-printed winding line.

Includes both Stationary Cone and Winding Cone.

Wire size is determined by thousandths of an inch and can be measured with a micrometer or vernier caliper.

We recommend having these Torsion Springs professional installed with the proper tools, experience and knowledge! Replacing Torsion Springs is very dangerous! These Torsion Springs are loaded with alot of tension, pressure and force!

Placing an order for these Torsion Springs relieves Garagedooropeners.us and Vendors of ALL liability or responsibility for properly damage, injury or death that may occur! Regardless of who or what places an order!

SHIPPED UPS GROUND ONLY...ALL TORSION SPRING SALES ARE FINAL!

Sorry...If these Terms are to harsh...Please do not place an order!

Our Price : $ 57.95

Select Your Torsion Springs:

Quantity:   




View larger picture

Sectional Garage Door Torsion Spring ( RW .243 x 2" ID ).

Right Wound .243 wire size X 2 inch inner diameter.

Sold in 1/2 inch increments ranging from 22 to 36 inches in active length.

High quality oil tempered wire.

Black Coating for a clean durable finish...Enhanced corrosion resistance.

Printed wire diameter and length identification.

Exclusive pre-printed winding line.

Includes both Stationary Cone and Winding Cone.

Wire size is determined by thousandths of an inch and can be measured with a micrometer or vernier caliper.

We recommend having these Torsion Springs professional installed with the proper tools, experience and knowledge! Replacing Torsion Springs is very dangerous! These Torsion Springs are loaded with alot of tension, pressure and force!

Placing an order for these Torsion Springs relieves Garagedooropeners.us and Vendors of ALL liability or responsibility for properly damage, injury or death that may occur! Regardless of who or what places an order!

SHIPPED UPS GROUND ONLY...ALL TORSION SPRING SALES ARE FINAL!

Sorry...If these Terms are to harsh...Please do not place an order!

Our Price : $ 57.95

Select Your Torsion Springs:

Quantity:   




View larger picture

Sectional Garage Door Torsion Spring ( LW .250 x 2" ID ).

Left Wound .250 wire size X 2 inch inner diameter.

Sold in 1/2 inch increments ranging from 22 to 36 inches in active length.

High quality oil tempered wire.

Black Coating for a clean durable finish...Enhanced corrosion resistance.

Printed wire diameter and length identification.

Exclusive pre-printed winding line.

Includes both Stationary Cone and Winding Cone.

Wire size is determined by thousandths of an inch and can be measured with a micrometer or vernier caliper.

We recommend having these Torsion Springs professional installed with the proper tools, experience and knowledge! Replacing Torsion Springs is very dangerous! These Torsion Springs are loaded with alot of tension, pressure and force!

Placing an order for these Torsion Springs relieves Garagedooropeners.us and Vendors of ALL liability or responsibility for properly damage, injury or death that may occur! Regardless of who or what places an order!

SHIPPED UPS GROUND ONLY...ALL TORSION SPRING SALES ARE FINAL!

Sorry...If these Terms are to harsh...Please do not place an order!

Our Price : $ 60.95

Select Your Torsion Springs:

Quantity:   




View larger picture

Sectional Garage Door Torsion Spring ( RW .250 x 2" ID ).

Right Wound .250 wire size X 2 inch inner diameter.

Sold in 1/2 inch increments ranging from 22 to 36 inches in active length.

High quality oil tempered wire.

Black Coating for a clean durable finish...Enhanced corrosion resistance.

Printed wire diameter and length identification.

Exclusive pre-printed winding line.

Includes both Stationary Cone and Winding Cone.

Wire size is determined by thousandths of an inch and can be measured with a micrometer or vernier caliper.

We recommend having these Torsion Springs professional installed with the proper tools, experience and knowledge! Replacing Torsion Springs is very dangerous! These Torsion Springs are loaded with alot of tension, pressure and force!

Placing an order for these Torsion Springs relieves Garagedooropeners.us and Vendors of ALL liability or responsibility for properly damage, injury or death that may occur! Regardless of who or what places an order!

SHIPPED UPS GROUND ONLY...ALL TORSION SPRING SALES ARE FINAL!

Sorry...If these Terms are to harsh...Please do not place an order!

Our Price : $ 60.95

Select Your Torsion Springs:

Quantity:   




View larger picture

Sectional Garage Door Torsion Spring ( LW .262 x 2" ID ).

Left Wound .262 wire size X 2 inch inner diameter.

Sold in 1/2 inch increments ranging from 22 to 36 inches in active length.

High quality oil tempered wire.

Black Coating for a clean durable finish...Enhanced corrosion resistance.

Printed wire diameter and length identification.

Exclusive pre-printed winding line.

Includes both Stationary Cone and Winding Cone.

Wire size is determined by thousandths of an inch and can be measured with a micrometer or vernier caliper.

We recommend having these Torsion Springs professional installed with the proper tools, experience and knowledge! Replacing Torsion Springs is very dangerous! These Torsion Springs are loaded with alot of tension, pressure and force!

Placing an order for these Torsion Springs relieves Garagedooropeners.us and Vendors of ALL liability or responsibility for properly damage, injury or death that may occur! Regardless of who or what places an order!

SHIPPED UPS GROUND ONLY...ALL TORSION SPRING SALES ARE FINAL!

Sorry...If these Terms are to harsh...Please do not place an order!

Our Price : $ 63.95

Select Your Torsion Springs:

Quantity:   




View larger picture

Sectional Garage Door Torsion Spring ( RW .262 x 2" ID ).

Right Wound .262 wire size X 2 inch inner diameter.

Sold in 1/2 inch increments ranging from 22 to 36 inches in active length.

High quality oil tempered wire.

Black Coating for a clean durable finish...Enhanced corrosion resistance.

Printed wire diameter and length identification.

Exclusive pre-printed winding line.

Includes both Stationary Cone and Winding Cone.

Wire size is determined by thousandths of an inch and can be measured with a micrometer or vernier caliper.

We recommend having these Torsion Springs professional installed with the proper tools, experience and knowledge! Replacing Torsion Springs is very dangerous! These Torsion Springs are loaded with alot of tension, pressure and force!

Placing an order for these Torsion Springs relieves Garagedooropeners.us and Vendors of ALL liability or responsibility for properly damage, injury or death that may occur! Regardless of who or what places an order!

SHIPPED UPS GROUND ONLY...ALL TORSION SPRING SALES ARE FINAL!

Sorry...If these Terms are to harsh...Please do not place an order!

Our Price : $ 63.95

Select Your Torsion Springs:

Quantity:   

AUTOMATIC Garage Door Services is part of the Troy A. Fike Enterprises network.